adam300tdi
Active Member
rang up lrs offroad and tryed to order a pair of wide angle props for a 300tdi disco.front 1 they said ye thats fine and the rear,they said theres no such thing as a wide angle rear prop for a disco.is that true??
discocheese
New Member
Would you mind elaborating pls mate, I.e wheir to buy frm ect ect....cheers...c
jamesmartin
Well-Known Member
youd need to remove rubber dough nut and fit 4 bolt flange with 200 tdi prop ,google frc8387
Jongould
New Member
WHS - this will easily cope with an extra 4-5" droop angle if not more, after that there are other wide angles available but are specialist made ones I believe....
Mark L
Well-Known Member
My D1 300tdi has a wide angled rear prop. The guy was most certainly talking out of his sphincter.
You'd need GL-GKN-845
http://www.gwynlewis4x4.co.uk/page36.html
Or a bit cheaper:
http://www.ebay.co.uk/itm/Land-Rove...arts_Vehicles_CarParts_SM&hash=item2ebd88823b
Thinking about it now, he was right to a degree as you can't get a wide angled prop under current the 3-bolt, donut set-up...
You'd need GL-GKN-845
http://www.gwynlewis4x4.co.uk/page36.html
Or a bit cheaper:
http://www.ebay.co.uk/itm/Land-Rove...arts_Vehicles_CarParts_SM&hash=item2ebd88823b
Thinking about it now, he was right to a degree as you can't get a wide angled prop under current the 3-bolt, donut set-up...
Last edited:
adam300tdi
Active Member
so he was right.u cant get a wide angle 1 for a 300tdi but can for a 200tdi.he said that the rear would be fine with a 4inch lift but lookin at it the rubber donut is on a real angle and doesnt look great to me just guna get a 200tdi prop
Mark L
Well-Known Member
That's not what you quoted:
Adam300tdi said:
Granted, the 300tdi requires the 200tdi set-up, but it's still a wide angled prop for a Disco, and the only thing separating the 2 is a simple 4-bolt flange kit.
Last edited:
adam300tdi
Active Member
when i rang up he just said you cant get one for the rear because of the length of them.there long enuff to not be effected by the angle increase
jamesmartin
Well-Known Member
its not the length but angle of diff ,it is more straight than the front ,and theres no point with wide angle at one end with rubber doughnut at the other ,part suppliers dont allways have the best knowledge depends if theyve actually real experience
adam300tdi
Active Member
im just guna put a 200tdi 1 on it
jamesmartin
Well-Known Member
good idea ,dont forget when fitting 4 bolt flange ,earlier flange needs a spacer fitting first the later flange has spacer in built ,you can check against length of your 3 bolt flange which also has spacer built in
disco147
Well-Known Member
No! :lol: everyone else has already done it for me :lol:
adam300tdi
Active Member
no breakers will sell me just the flange but theres a conersion kit on ebay so im just guna buy that
adam300tdi
Active Member
ye was it decent
