discoboy84
New Member
calm it guys, you may wake the admin ;-P
why not just use a galvo lightweight chassis? Series Chassis
jamesmartin
Well-Known Member
how much of the vehicle have you got with id ,that wouldnt be ringing a vehicle like that bloke on ebay
jamesmartin
Well-Known Member
newson ,how much of disco do you have do you want to make disco running gear with light weight body or just chassis replacement
martin1512
Well-Known Member
This isn't as daft a post as some people are saying. In the 60's & 70's. when land rover were developing the range rover, they experimented with various body types on the new chassis. One of the best known prototypes was the 100" land rover, but they also did a couple of prototypes for the army using a modified lightweight body on the range rover chassis, and a 110" lightweight provisionally called the 110" bonneted control. Unfortunately neither of these models ever made it into production
Last edited:
next silly question.....
why not use a defender 90 chassis and running gear with the lightweight body panels?
would give the benefits of coil suspension whilst looking like a lightweight
im guessing the 2 inch differece would appear in the position of the rear wheels in the rear arches... simple trim job..... or am i missing something ?.
like why wreck a good 90
why not use a defender 90 chassis and running gear with the lightweight body panels?
would give the benefits of coil suspension whilst looking like a lightweight
im guessing the 2 inch differece would appear in the position of the rear wheels in the rear arches... simple trim job..... or am i missing something ?.
like why wreck a good 90
I am confused.... The OP asked the following......
He has not, to my knowledge, explained whether he specifically wants to fit to a Disco chassis, was just unaware that they were different sizes or that he could get a replacement chassis designed for a lightweight.
Unless and until he can be more specific, it is difficult to help him further.
Hi, my mate has a lightweight with wrotten chassis. Just curious if anyone has done or seen a lightweight body fitted to disco chassis and whats involved?
He has not, to my knowledge, explained whether he specifically wants to fit to a Disco chassis, was just unaware that they were different sizes or that he could get a replacement chassis designed for a lightweight.
Unless and until he can be more specific, it is difficult to help him further.
buckshot
Well-Known Member
Big Stu 12
Well-Known Member
Am I missing something here, apart form I would love a light weight, I love the look of them , but never been in the position to have one.
My question is, is a Bobtail not shortened, I take it its the last but if the rear part of the Chassis that is cut off, in this case its a bit more complicated then that?
Yes - cis he needs to alter the wheelbase. A bobtail just has the overhang reduced.
No. it wouldn't. As i stated, i can tell you exactly where all the main comonents are...
engine is in my series,
gearbox sold on eBay
Transfer box in firends disco
Front axle in storage in my shed, maybe going on the series
Rusty body scrapped
Wheels for sale still
Rear axle sold on eBay
etc.
The DVLA won't let me return the V5 as scrapped as it was self scrapped and told me to either SORN it for life or if there are any parts left scrap / sell the V5 with those parts.
Only doing what i'm told.
