scott02464 · Oct 19, 2010

I currently have these doors on me Defender (see attached pics)

Iv just bought the series type doors (After some decent advice and opinions off you dudes! Cheers)

Iv gone for the Anti-burst type latches and just wondered if my slam plates will be the same for both types of latch or will i have to get the matching slam plates for the new locks?

Appologise for ****e pics, had to take the with me torch as its dark now

Cheers, Scott

storm99 · Oct 19, 2010

Nope, not the same, you'll need to get the series door plates..cheap though.

scott02464 · Oct 19, 2010

storm99 said:
Nope, not the same, you'll need to get the series door plates..cheap though.

Cheers mate, i need to get some lock barrels any way so will pick em up together

Scott

storm99 · Oct 19, 2010

These..

320609 Barrel and Keys

and these..

John Craddock LTD - STRIKER PLATE FOR DOORS 1958 TO 1984 SLAM TYPE - MTC4195

scott02464 · Oct 19, 2010

storm99 said:
These..

320609 Barrel and Keys

and these..

John Craddock LTD - STRIKER PLATE FOR DOORS 1958 TO 1984 SLAM TYPE - MTC4195

Cheers for that mate! Sorry for late reply

Do the lock barrels turn the hook shaped bit of metal to lift up the black catch on the back of me latch itself?

storm99 · Oct 19, 2010

They drop a hook that stops you lifting the handle on the outside..have you got the split glass sliding windows? If so you'll need the little twist and press metal knob that stops you just sliding the window open from the outside too..

scott02464 · Oct 19, 2010

storm99 said:
They drop a hook that stops you lifting the handle on the outside..have you got the split glass sliding windows? If so you'll need the little twist and press metal knob that stops you just sliding the window open from the outside too..

Yeah its the split glass type, they look ace i cant wait to get em on and have some doors that work for a change! I got the window locker mate i odered it wi the doors.

I cant seem to work out where the hook shaped bit on the barrel would go on the latch i have (See pic) Just me being daft again lol!

storm99 · Oct 19, 2010

Haha..just looked at mine, i've got the 2 piece type so i can take tops off in summer...theres no hole for any lock on the drivers door!

Ah well. padlock and latch as usual....

storm99 · Oct 19, 2010

scott02464 said:
Yeah its the split glass type, they look ace i cant wait to get em on and have some doors that work for a change! I got the window locker mate i odered it wi the doors.

I cant seem to work out where the hook shaped bit on the barrel would go on the latch i have (See pic) Just me being daft again lol!

Oh right, you've got the later, more expensive type...your existing door striker plate will fit them fine. Make sure you order the right locks and barrels though...

scott02464 · Oct 19, 2010

storm99 said:
Oh right, you've got the later, more expensive type...your existing door striker plate will fit them fine. Make sure you order the right locks and barrels though...

Ah phew lol! Thats even better then mate! Less messing then if its the same striker plates ha!

Just had a look on me back door and it has the same as you mentioned (With the hook thing) i see how they work now cheers! Its hard to get ya head round somet isnt it sometimes when theres nothing to compare them too.....

Cheers for ya help mate, much appreciated

Scott

mgb21 · Oct 20, 2010

just a quick one, with that rear door latch you've got, any ideas on changing the locking bolt? Ive changed the latch on the rear door but still had no luck with the lock barrel. It was suggested that there should be a small hole on the side of the barrel tube but there doesnt appear to be one, any ideas on how i could be able to get the lock out to put it in the new one.

cheers matt

scott02464 · Oct 20, 2010

mgb21 said:
just a quick one, with that rear door latch you've got, any ideas on changing the locking bolt? Ive changed the latch on the rear door but still had no luck with the lock barrel. It was suggested that there should be a small hole on the side of the barrel tube but there doesnt appear to be one, any ideas on how i could be able to get the lock out to put it in the new one.

cheers matt

Just found this http://www.landyzone.co.uk/lz/f7/90-rear-door-lock-barrel-removal-96539.html

Theres a couple of links on there, Hope it helps

Scott

scott02464

Active Member

Attachments

storm99

Spreading Joy & Harmony

scott02464

Active Member

storm99

Spreading Joy & Harmony

scott02464

Active Member

storm99

Spreading Joy & Harmony

scott02464

Active Member

Attachments

storm99

Spreading Joy & Harmony

storm99

Spreading Joy & Harmony

scott02464

Active Member

mgb21

New Member

scott02464

Active Member

Similar threads