angeloc
Well-Known Member
I seem to be chasing problems these days. I had a recon VCU fitted about 3 months ago and all was well. TD4 with 93k.
This week noticed a noise Luke a wheel bearing from rear - also had a shimmy on acceleration for a while.
Yesterday checked over underneath could feel or see anything loose etc. Loosened VCU hangers and reset.
Now shimmy has hone bit I have a loud drone from rear - sounds like diff but what do you guys think?
Question - if I drop the prop and VCU out will this stop any further wear on diff in case I have get a recon.
I am going to recheck the VCU alignment - would this cause the diff to groan/drone if it was miss-aligned?
Cheers
This week noticed a noise Luke a wheel bearing from rear - also had a shimmy on acceleration for a while.
Yesterday checked over underneath could feel or see anything loose etc. Loosened VCU hangers and reset.
Now shimmy has hone bit I have a loud drone from rear - sounds like diff but what do you guys think?
Question - if I drop the prop and VCU out will this stop any further wear on diff in case I have get a recon.
I am going to recheck the VCU alignment - would this cause the diff to groan/drone if it was miss-aligned?
Cheers