Winu
Active Member
Hi,
Could somebody post me some diameters of L-series pipes. Currently I don't have access to my car to measure it, and any word about that in RAVE or Microcat
I'm looking for:
-ID of crank case breather (pipe between engine and intake pipe)
-ID of vacuum pipe from engine to brake servo.
Also got a question:
Vaccum pipe on l series have some "T" in the middle (for EGR supply). I found that it probably have a one side valve (have arrows pointed to engine side). Is that valve will be needed if my EGR stuff is removed and no longer used ? Can I put just one piece pipe to brake servo, or that valve is must have for some reasons ?
Could somebody post me some diameters of L-series pipes. Currently I don't have access to my car to measure it, and any word about that in RAVE or Microcat
I'm looking for:
-ID of crank case breather (pipe between engine and intake pipe)
-ID of vacuum pipe from engine to brake servo.
Also got a question:
Vaccum pipe on l series have some "T" in the middle (for EGR supply). I found that it probably have a one side valve (have arrows pointed to engine side). Is that valve will be needed if my EGR stuff is removed and no longer used ? Can I put just one piece pipe to brake servo, or that valve is must have for some reasons ?
Last edited:
