Andrew McIntyre
Active Member
Sometimes tyres wearing unevenly can make this type of noise, I once had this problem on a focus I used to have, I changed both rear wheel bearings as I thought it was them, just turned out to be tyre wear. Worth a look maybe.
Just Billy
New Member
Have you noticed it more when cornering if so it could be the tyres as mentioned above especially as I note you have replaced the vcu bearings you obviously had that problem. I bought one recently and it had all that work done and had the road noise and more so when cornering so thought nothing of it. I had an idea it could be the tyres and I was replacing wheels and all. After I replaced the wheels and tyres I only noticed then that the tyres were actually almost warped although still good tread. I put this down to the last owner driving too long with transmission trouble. The noise is now gone.
Ian jones
Well-Known Member
keep us informedok just got it looked at and the only thing making any noise under there is the front vcu hanger bearing but only slight.
now thay were replaced in april with kgn hangers and fang bearings and ones noisy already
so iv got the number of the company that supply bell engineering so will ring them monday.
still luck of the drew i suppose that the kgn ones are failing ??
now thay were replaced in april with kgn hangers and fang bearings and ones noisy already
so iv got the number of the company that supply bell engineering so will ring them monday.
still luck of the drew i suppose that the kgn ones are failing ??
Soloby Rob
Banned
What is the definition of a "whilst type winning nose"
Soloby Rob
Banned
