mikescuba

Well-Known Member

• Nov 18, 2015

• #1

Does anyone have any pic's of these on there Defender.
http://www.paddockspares.com/pm789-defender-extended-arches-2-inch-wider-than-standard-set-of-4.html

My Defender is soon going in for a respray and I'm wandering if I should get a set of these. At present I have what I believe are standard rubber ones.
I have slightly off center Modular steel wheels which seem to stick out a bit more and when in mud etc the mud gets thrown up all over the side of the Defender. I am running on 235 x 85 x 16. Not sure if the above would look silly on my current set up.

 

vilguy

Do'er of stuff and the like

• Nov 18, 2015

• #2

They are on my 110csw (see my thread in members vehicles)

however you can get them much cheaper elsewhere

 

mikescuba

Well-Known Member

• Nov 18, 2015

• #3

vilguy said:

They are on my 110csw (see my thread in members vehicles)

however you can get them much cheaper elsewhere

Click to expand...

having difficulty finding your pictures on this new site.

 

vilguy

Do'er of stuff and the like

• Nov 18, 2015

• #4

I dont seem to have any since i fitted the front ones, but heres the rear

 

mikescuba

Well-Known Member

• Nov 18, 2015

• #5

I also have General grabber, what size are your's? Mine are 235x85x16 do they look OK with that tire size?

 

lucifus

Active Member

• Nov 18, 2015

• #6

They'll look silly with 235s. This is with 305s. I'm not a fan but they keep me legal.

 

vilguy

Do'er of stuff and the like

• Nov 18, 2015

• #7

Mine are 33 x 12.5s

235s look ok so long as you have some offset rims or 30mm spacers.

I had 235s on boost alloys for a while with the spacers and they looked ok

 

mikescuba

Well-Known Member

• Nov 19, 2015

• #8

lucifus said:

They'll look silly with 235s. This is with 305s. I'm not a fan but they keep me legal.

Click to expand...

Many thanks, much appreciated. Nice pic's