S

steve-c

New Member

• Mar 11, 2010

• #1

hi guys and gals,
will a TD5 landrover bulk head go into my 91 defender ? or will it need modifying and to what extent...?

any one know and can recommend any good breakers.
Cheers Steve

 

bustersbus

Well-Known Member

• Mar 11, 2010

• #2

steve-c said:

hi guys and gals,
will a TD5 landrover bulk head go into my 91 defender ? or will it need modifying and to what extent...?

any one know and can recommend any good breakers.
Cheers Steve

Click to expand...

Aye it will with some mods... fillin' holes cuttin' the wiper motor bracket off, drillin' holes and stickin' some rivnuts in.
Ye might want to try a search on here as it's bin covered a few times before

 

bluehaze

Well-Known Member

• Mar 11, 2010

• #3

And is well worth the days effort - follow Buster's advice as he knows what he's talking about.

 

S

Sean

Banned

• Mar 11, 2010

• #4

bluehaze said:

And is well worth the days effort - follow Buster's advice as he knows what he's talking about.

Click to expand...

it takes more than a day mate

Galvanised Bulkhead Pointers - LR4x4 - The Land Rover Forum

 

CROWBLIND

Active Member

• Mar 11, 2010

• #5

Where abouts are you based?
TD5 Bulkhead will fit no prob, but you will need to cut a hole for the wiring loom behind the fuse box and also bung a few up. Bonnet pull is different to, i made a beacket to fit the old bonnet pull, but i suppose you could use the td5 item, but mine didnt have one.
I know a landy breaker just north of brum, mine cost 95 quid. Allow plenty of time to swap as it is a bit of a time consuming job to say the least. Good luck

 

S

steve-c

New Member

• Mar 12, 2010

• #6

hi crowblind,
i am based in malvern worcester.