H

Ham Salad

Active Member
Can someone explain please, I have been reading redhands post on alloys and it says that the defender, rr, and disco 1 have the same wheel offset and the pcd.
Does this mean I can fit these straight on my defender or,do I still need spacers with alloys,for them to fit. Thanks
 
is yours 300 tdi as all 3 at that time used the same axles bar the brakes ,pcd didnt change from series till disco2 and p38 which are different,200 and earlier defenders have too wide hubs to fit 300 alloys without fitting spacers
 
200 or 300 tdi as 300 hubs poke out less to accept alloys 200 stick out too far unless specific bought for it or spacers used
 
jamesmartin said:
is yours 300 tdi as all 3 at that time used the same axles bar the brakes ,pcd didnt change from series till disco2 and p38 which are different,200 and earlier defenders have too wide hubs to fit 300 alloys without fitting spacers
Click to expand...

Thanks JM my defender is 1997 P reg 300tdi 110 hardtop, it has discs front and back I have a set of disco1 and disco2 alloys, I was hoping that the D1 would need no spacers, thanks Steve.
 
I've got a 1992 200tdi Defender with 30mm spacers, and the alloys fit and look the business :D
 

Attachments

  • 2012-01-02 14.52.05.jpg
    2012-01-02 14.52.05.jpg
    255 KB · Views: 989
Thanks for posting the photo, I was hoping not to fit spacers I just wanted to fit the wheel straight on, as I am not so fussed with fitting spacers,as I read on here that insurance don't like them,and neither do the wheel bearings
 
You must log in or register to reply here.

Similar threads

R
200tdi Defender alloys
Replies
9
Views
1K
ijmj
ijmj
L
Theft Deterrent- 300TDI 90
Replies
18
Views
1K
Modama
M
lightning
Steel wheels from the new Defender
Replies
12
Views
1K
lightning
lightning
S
Tyre Change
Replies
8
Views
1K
Anaconda
A
S
Defender stance
Replies
2
Views
551
dag019
dag019