rick071155
New Member
hi could anyone tell me where the flasher unit is located on a 06 plate defender 90 any help would be greatly appreciated cheers.
rick.
rick.
discomania
Well-Known Member
Behind the fuse box cover which is in front of the gear sticks.
It will have something along the lines of 2 x 21w + 5w blah blah on it (the configuration of the indicator bulbs).
It will have something along the lines of 2 x 21w + 5w blah blah on it (the configuration of the indicator bulbs).
rick071155
New Member
hi thanks for the reply but i already checked there , on the late models they must have stuck it some place else.
rick.
rick071155
New Member
surely theres a defender guru on here knows .
rick.
rick.
Pikey
Dummy Ejection Facilitator..
have you tried googling "defender indicator relay location"
discomania
Well-Known Member
Yeah what he says...
To be honest I don't see why they would have moved it from the main fuse box area, would be pretty daft.
Mine is on the left hand side behind the inner metal panel.
couga861900
New Member
I wanted to know if a regular flasher relay would work with LED Lights. I think the relay is behind the fuses.
Trewey
Cockernee, Pasty munchin bastid.
No. You'll need a solid-state relay.
Then your trailer tell-tale will flash whether or not there is a trailer connected.
dogsbody
Very senior member
Or put big load resistors (about 10 ohm / 50 watt) across each lamp.
DEFENDER90-DAZ
New Member
Put your finger on a relay and turn on the indicators - if its the right relay you will feel the relay operate 
Daz
Daz
couga861900
New Member
I'm having problems with my flashers. When I turn on the left side it flashes and the right side flashes but no as bright. The same happens on the other side. I changed the relay and placed an relay that works with LED lights but I still have the same problem. We checked the ground (earth) but that does not seem to be the problem. I don't know what to do.
Richie Box
New Member
Have u tried checking the hazard switch, indicators run through this I think.
DEFENDER90-DAZ
New Member
I'm having problems with my flashers. When I turn on the left side it flashes and the right side flashes but no as bright. The same happens on the other side. I changed the relay and placed an relay that works with LED lights but I still have the same problem. We checked the ground (earth) but that does not seem to be the problem. I don't know what to do.
Read this:
Hazard Switch & Indicators - fault diagnosis - Defender Forum - LR4x4 - The Land Rover Forum
Daz
Simoncrayner
New Member
The flasher relay on my 2003 td5 is in the instrument binical behind speedo .
Paxmanmerv
Active Member
Well this is a strange one.....
Got an old Td5 defender in & keeps blowing indicator fuse. Put new fuse in, turn key on & pop straight away.
Had a look round which included pulling the flasher unit out. Cleaned the legs & popped back in & tried it.
New fuse, key on, no fuse pop & indicators work.....
Go figure.....
Got an old Td5 defender in & keeps blowing indicator fuse. Put new fuse in, turn key on & pop straight away.
Had a look round which included pulling the flasher unit out. Cleaned the legs & popped back in & tried it.
New fuse, key on, no fuse pop & indicators work.....
Go figure.....
Kwakerman
Well-Known Member
Sounds like you have disturbed the real fault when pulling the relay out, either that or there is something loose in the relay that was shorting the supply and you disturbed that when cleaning the contacts.
