discostew38
Active Member
I'm sure the way they fit is different
discostew38
Active Member
I'm not sure exactly what it is you want to or why but I have a D2 with air rear and a p38 but that's on springs so I can only go by memory for the air bags on that
But the rear air bags are different on the two cars
Or are you thinking about putting air on the front of the disco as well?
But the rear air bags are different on the two cars
Or are you thinking about putting air on the front of the disco as well?
L90 BCM
Active Member
Sorry for late reply, yes i basically want to put 4x air suspension bags on a d2 chassis, i all ready have a p38 eas block, so i can make the wiring up to control it all manually.
The rear i think will be straight forward as the shock mounts independent to the spring/bag, unlike the front which mounts through the middle of the spring.
As the p38 has air suspension on all four corners so it's front shocks are mounted behind the axle. I will need to make a bracket for this, was going to use the top from a twin front shock set up as it just bolts on top of the spring hanger ( where the turret it )
I just wanted to know if the length and width of the bags was much different and how they mount top and bottom.
L90 BCM
The rear i think will be straight forward as the shock mounts independent to the spring/bag, unlike the front which mounts through the middle of the spring.
As the p38 has air suspension on all four corners so it's front shocks are mounted behind the axle. I will need to make a bracket for this, was going to use the top from a twin front shock set up as it just bolts on top of the spring hanger ( where the turret it )
I just wanted to know if the length and width of the bags was much different and how they mount top and bottom.
L90 BCM
discostew38
Active Member
I see
I would think you would be better off using disco rear bags on the front axle as well as on the rear because they are more spring like than the p38 fronts
And do the brackets for the shocks like you said I can't see why it wouldn't work
I would think you would be better off using disco rear bags on the front axle as well as on the rear because they are more spring like than the p38 fronts
And do the brackets for the shocks like you said I can't see why it wouldn't work
