D90mitch

Well-Known Member

• Jul 24, 2016

• #1

Hi all,

need to replace my CV / bearings etc as a seal failed and water got in. I have 10 spline front axle but not sure what Landy it is off. Fairly sure not Defender.

It Looks like this

Want to make sure I get the correct CV joint. Also, are the swivel housing bearings etc the same for RRC/early disco and def?

Thanks

 

ProcrastinatorFraser

Active Member

• Jul 24, 2016

• #2

Doesn't look like anything i've seen on my 90 nor on my disco by the shape of the flange

 

Kwakerman

Well-Known Member

• Jul 24, 2016

• #3

Does the flange have a Pt No on it, if it does google it and you may be able to identify it that way. Also your disk / pads looks like they on the way out or you have seized pistons in the caliper, should be an even finish all over the disk (except for small circles at the inner and outer diameters of the disk).

 

D

discomania

Well-Known Member

• Jul 25, 2016

• #4

D90mitch said:

Hi all,

need to replace my CV / bearings etc as a seal failed and water got in. I have 10 spline front axle but not sure what Landy it is off. Fairly sure not Defender.

It Looks like this

Want to make sure I get the correct CV joint. Also, are the swivel housing bearings etc the same for RRC/early disco and def?

Thanks

Click to expand...

That's the flanges that were used on the 200tdi Disco - not sure of dates used etc. but that axle type was 100% fitted to early Discos.

 

D90mitch

Well-Known Member

• Jul 25, 2016

• #5

Thanks for the info. Thats not my truck in the pic just grabbed it off the net, my truck got nearly new pads and discs