B

bigjak

Active Member

• May 18, 2016

• #1

I am cutting the very rear part of my headlining (over door) to take a pair of speakers.
I should have cut the holes before I recovered the piece but I don't have that option now. What is best to cut the fibre board headlining material? Holesaw, jigsaw?

 

dag019

Well-Known Member

• May 18, 2016

• #2

I used a Stanley knife when I fitted speakers to mine. As long as you have a new sharp blade I did not have any problems.

 

M

Merryck

Active Member

• May 18, 2016

• #3

Have you tried a bread knife? Sounds odd, but I've always found it works quite well!

 

Flossie

Well-Known Member

• May 18, 2016

• #4

Stanley knife
Jigsaw with a fine blade
Fine hacksaw blade held in a rag or thick glove.
Jigsaw may transfer dirt to the cloth though?
Stanley blade is the least likely to pull the cloth though.

 

bankz5152

Well-Known Member

• May 18, 2016

• #5

I did a stanley knife and a fine bread knife, worked very well. Tried a jigsaw was a pain!

 

B

bigjak

Active Member

• May 19, 2016

• #6

Thanks.