Bromsgrove Defender
Well-Known Member
Two spring to mind one perhaps more helpful than the other....... just
1, Have a look in the manual to see where the sensors are.
2, Keep you right foot nice and steady when driving
Last edited:
sidewaysste
Active Member
When mine stopped working it was because the vacuum control lines were perished.
shortarse
New Member
Hi check that its all connected under the bonnet there is a vac pump under the jack and wheel chock area ( hard to get to ) then the pipe runs up to the brake servo where it should t off all mine had split so it wasnt working i cut and refitted and hey presto it all works hope this helps ya
