S

series III

Member

• Feb 23, 2012

• #1

Clutch seems to work okay. When driving there is normal travel and it engages the gearbox ok. The problem is selecting 1st or second. It is easer to select first after locating second and then moving forward into 1st.

worse when cold.

clean oil in Gearbox

any ideas before I start dismanteling the whole thing

its a '83 2,3 derv

ta

M

PS was left standing for 18months and now its being used a bit little probs keep appearing - some seem to go away all on there own.....but others haunt me in the early hours.

 

jamesmartin

Well-Known Member

• Feb 23, 2012

• #2

if clutch isnt clearing properly reverse will grate when selecting it ,if it selects well then 1st ,2nd baulk rings and probably dog teeth on the 2 gears

 

S

series III

Member

• Feb 24, 2012

• #3

It goes into reverse ok, grates occasionally but not every time. Cant remember if i said the clutch wines when depressed.

 

jamesmartin

Well-Known Member

• Feb 25, 2012

• #4

gear box and release bearing ,you would fit complete clutch kit when gear box was out anyhow

 

S

series III

Member

• Feb 25, 2012

• #5

So i take it the release bearing is causing the wining noise, and likely need to replace the dog teeth and baulk rings on the 2 gears.

And while there fit a new clutch kit.