generaldogsbody

Active Member

• Nov 16, 2013

• #1

Clutch failed,was fine no bangs or noises.I went to change gear,felt the pressure and then it went straight down to floor.No fluid leaks,no bubbles in reservour when you pump it.Tried bleeding it,seems to push air and fluid out of bleed nipple but won't pressurise.Is it the master ,or slave cylender.Any ideas.cheers .

 

jamesmartin

Well-Known Member

• Nov 16, 2013

• #2

replace both, but first remove slave and check it and rod which will indicate if release lever is split or ok

 

Craiggillin1985

New Member

• Nov 16, 2013

• #3

Sounds like master but check pipe makes sure it's not chaffed on chassis

 

generaldogsbody

Active Member

• Nov 17, 2013

• #4

Even if one of the clutch master or slave servo's has failed,should the pedal come back up anyway.

 

jamesmartin

Well-Known Member

• Nov 17, 2013

• #5

generaldogsbody said:

Even if one of the clutch master or slave servo's has failed,should the pedal come back up anyway.

Click to expand...

they have an over center assist spring which makes pedal stay down once pressure in systems lost

 

generaldogsbody

Active Member

• Nov 17, 2013

• #6

Thanks everybody,gonna get it jacked up in the morning.