foss

foss

New Member
In the 110, (84 12j), unless we change gear VERY gently letting the clutch pedal back up, we get a clunk noise from under the front seats, like theres play somewhere...
The prop UJs "seem" fine but wouldnt rule them out...could there be play in the tranny box output flanges does anyone know?
 
I have something very similar Foss - suspect it's the output shaft splines, but living with it for now:D

UJs look fine - some slack when I rotate the prop by hand before it goes 'firm'

Be interested to see what others suggest
 
LOL@ Station...I knew there was a reason I was gonna fit a cd player ;-)

please explain MHM...is that the Intermediate shaft between the gearbox & tranny box?
 
it could be - they do wear and then when they go - no drive. Tiz worth checking tho.

there are two types - so check which one it is.
 
cool...is there an existing thread covering it or can you point me where to look & how to tell the 2 apart...
 
was very common before cross drilled input gears if std 110 transfer box there are two input gears both have 26 teeth the early one frc5428 and later wider ftc5089 the latter comes cross drilled the earlier doesnt, there is another 28 teeth for disco boxes ftc5087
 
You must log in or register to reply here.

Similar threads

nbrooks
Possible Clutch/Transferbox issue
Replies
0
Views
574
nbrooks
nbrooks
19_Hue_95
Transmission 'clunk'
Replies
18
Views
4K
Brown
Brown
bankz5152
Transmission Slack/Backlash
Replies
13
Views
2K
bankz5152
bankz5152
HeywoodFloyd
Should my wheels move like that?
Replies
18
Views
2K
HeywoodFloyd
HeywoodFloyd
Si Click
TD5 Manual Transmission failure diagnosis - LT230?
2
Replies
24
Views
4K
Si Click
Si Click