blue beasty
Leaks an prone to bits dropping off
Better description of what you have is needed.
Standard is a switch which clips onto the cable under the bonnet about 6" from thr bulkhead but you may have a non standard cable/switch
Standard is a switch which clips onto the cable under the bonnet about 6" from thr bulkhead but you may have a non standard cable/switch
blue beasty
Leaks an prone to bits dropping off
Apparently some had two switches. One on the cable like...
And another temp sensor wired in series on the front of the head so the light only comes on when the choke is out and the engine is up to temp.
Mine just has the cable switch minus the clip so it's cable tied on (temporarily obviously
)
And another temp sensor wired in series on the front of the head so the light only comes on when the choke is out and the engine is up to temp.
Mine just has the cable switch minus the clip so it's cable tied on (temporarily obviously
)
blue beasty
Leaks an prone to bits dropping off
It clamps onto the sleeve on the right of this pic...
If you don't have the right cable the switch is live when open ie not clamped to anything.
Iirc there's a little push button where the switch clamps to the cable and the light goes out when it's depressed by a cable join under the sleeve
If you don't have the right cable the switch is live when open ie not clamped to anything.
Iirc there's a little push button where the switch clamps to the cable and the light goes out when it's depressed by a cable join under the sleeve
