http://www.amazon.co.uk/gp/aw/d/B007V689TK anyone reckon these would be good for a defender? How maby meters do you reckon it would take
Kev@kenninghall
Well-Known Member
Same cost? When I last looked a genuine door seal was around £60
timtheenchanteruk
Well-Known Member
bearmachs are £15+VAT from paddocks... even pattern ones will work better than off the shelf universal one size fits nowt seals.
Bromsgrove Defender
Well-Known Member
Kev@kenninghall
Well-Known Member
timtheenchanteruk
Well-Known Member
I read in one of the old LRO mags i got floating around, that LR didnt want to seal the defender too well, otherwise it would float too much, sinking aids traction to cross water.
hctbn
Member
Through holes in the floor of course
All Land Rovers leak - but they let it out again with supreme efficiency!
Yeah you're all right sealing it would be an awful idea... was hoping 20 quid worth might have done me... diesel eats pretty much all of my pay so I try to save as much as possible with stuff like this... specially since im doing piston rings hg and big end bearings in summer and I know i need loads of money cause more than likely more stuff than that will need replaced
Going by every body panel I would say that being the real thing does not guarantee correct fit haha
Beaver
Active Member
That was me and fitting is much easier with a hairdryer.
Corrected for accuracy
THEengineer
whatever
steveyorks
Well-Known Member
Cant see the difference seals would make ie genuine or otherwise. They all leak and if they didn't the water would get in somewhere else...or the wind....
