£350 + fer that ffs, yer must be stupid, as fer that before and after guy he's a dick by all acounts , as g spot says,

get yer chassis rubbed down at yer leisure, get it ready and do it your self fer oooh around £40 of stuff :) and yer kno its been put on to good clean chassis not sprayed oevr ****e like his, that axles a slap over job be the looks of it, his website dont sell it to me either ;)
 
Don't waste your money. Spend it on a welder instead yoiu're going to need it. Disco chassis don't seem to rust too badly it's the bodywork that rots.
 
humm ok i only looked at him because his ad's are always in the landy mag. this guy looks good http://www.thewaxworks.net/about_us.html but its a tad far away for me :( i'd rather have the job done properly and it all injected into the chassis rather then me feckin it up and missing parts plus i dont really have the area to do it
 
if yer want to do it proper, take it to a tesco car park at night, fill the chassis up with runny wax oil and drive round the parking bays till its sloshed round yer chassis, then they get all the mess :)
 
i'd still rather get it done professionally so can get the chassis proper clean before hand and to get it injected in the chassis, i'd like somewhere like the waxworks place as they do inside the doors and the inside of the floor and everythign
 
306 sam said:
i'd still rather get it done professionally so can get the chassis proper clean before hand and to get it injected in the chassis, i'd like somewhere like the waxworks place as they do inside the doors and the inside of the floor and everythign
Click to expand...
ffs its easy do it yourself you lazy git
 
maybe so but i don't have any ramps to be able to get under there and jet wash everything and to be able to inject into the chassis, but no worries i'll ask somewhere else
 
306 sam said:
maybe so but i don't have any ramps to be able to get under there and jet wash everything and to be able to inject into the chassis, but no worries i'll ask somewhere else
Click to expand...

crawl under it like the rest of us do then:confused:
 
its a **** easy job! do it the way i am, strip the entire landy down to just its chassis then you will have enough room to work!
 
You must log in or register to reply here.

Similar threads

R
Ex military 90 soft top 1994 - 300TDi conversion
Replies
7
Views
665
ChristopherDailey
C
M
Disco 1 Measurements for Rear Door Gap
Replies
14
Views
729
resto_d1
R
F
110 Pickup Chassis/Bulkhead Swap order of events
Replies
14
Views
3K
Knappster
Knappster
B
1996 Land Rover Discovery 300TDi Restoration
2
Replies
35
Views
2K
oceans1
O
Disco-Skipper
Disco 2 Rust Repair Quote Reasonable?
2 3
Replies
54
Views
8K
tilly2
tilly2