P

paddocks1967

New Member

• Dec 29, 2011

• #1

Hi guy,s havent been on for a while,the problem is that i was going to change the door cam lock Kit as i kept pulling the doorhandle off as the plastic cam was worn anyway went to change the camkit over today but i broke the metal bit that wee pin went in.i have now put a different lock in but i dont have a key is there anyway that i can take out the key barrel from my original door lock and swap them .cheers pat.

 

wil2813

Well-Known Member

• Dec 29, 2011

• #2

i recall recently someone had the same problem and managed to swap the barrel check back in the threads

 

jt_armstrong

Well-Known Member

• Dec 29, 2011

• #3

Not sure if its easy or even possible to swap the lock barrel however I bought a new handle from Rimmers for thirty odd quid which was matched to my key using my VIN.

 

P

paddocks1967

New Member

• Dec 29, 2011

• #4

Thanks for the replies guys,its alright you can do it i have just separated it ,thanks again pat.