busy....ordered some metal today for the turds sliders......

a bit more than i expected......still...off dancing n a mo.....
 
Yup, it rubs a bit on the radius arms but not too bad.
Also rubbing on front wing (bottom front of arch) i think. Hard to tell without someone hanging out the window looking, whilst i raz round a roundabout!
Might need to give wing front bottom a little trim.
 
Thanks, need to do that some time.
Trying to find some fixings for a bonnet cargo net, am i right in remembering Captain Chaos saying you can make them in stainless or something?
 
Go to a ships chandlers or marine engineering shop and buy a load of small stainless steel ring bolts. and an equal number of small screwgate links and fit them to your bonnet then attach the net to the rings. using the small screwgate shackles
 
redhand said:
Go to a ships chandlers or marine engineering shop and buy a load of small stainless steel ring bolts. and an equal number of small screwgate links and fit them to your bonnet then attach the net to the rings. using the small screwgate shackles
Click to expand...

Good idea ............ but a bit long winded compared to what boggle makes ;)
 
redhand said:
Go to a ships chandlers or marine engineering shop and buy a load of small stainless steel ring bolts. and an equal number of small screwgate links and fit them to your bonnet then attach the net to the rings. using the small screwgate shackles
Click to expand...


stainless top hats a re a bit simpler.....
 
You must log in or register to reply here.

Similar threads

Mickob71
Tyres for a disco 1 16”
Replies
0
Views
595
Mickob71
Mickob71
Littlenicky
Advice? Should I upgrade to a 405?
Replies
13
Views
879
Littlenicky
Littlenicky
Zakmyster
fuel/inertia switch/starting issue
2
Replies
22
Views
1K
sierrafery
sierrafery
Spanky-spangler
Land rover owner international show-Grantham 2024
Replies
6
Views
978
Spanky-spangler
Spanky-spangler
W
Instrument bulb holders
Replies
4
Views
493
dag019
dag019