The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• May 17, 2010

• #1

How can one tell if the radius arms are castor adjusted radius arms or not?
I assume they are "kinked" in some way? Can that "kink" be measured in some way to identify a castor adjusted from a non-adjusted radius arm?

 

D

dollydisco

New Member

• May 17, 2010

• #2

i know the rear trailing arms are kinked if they are radius corrected, fronts im not to sure,but you should be able to tell if they are upgraded!

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• May 17, 2010

• #3

I got a couple given to me - and I need to check if they are "standard" or not, so need to be able to confirm.

 

D

dollydisco

New Member

• May 17, 2010

• #4

upload pictures,ill tell you>

 

Trewey

Cockernee, Pasty munchin bastid.

• May 17, 2010

• #5

they aint kinked.
the holes for the bushes are 3 deg (for 2" lift) or 6 deg (for 4" lift) offset on the curve of the hockey stick.

if they're QT ones, they'll have +3 or +6 on them.

 

D

dollydisco

New Member

• May 17, 2010

• #6

the REAR trailing arms are the fronts i,e the radius arms (rears being the trailing arms) will have offset holes in the bushes, hence why i said,upload pictures and ill tell you