S

Salisburylander

Active Member
When I turn the key, there is power to everything but it won't even turn over. It's an automatic and the gear indicator shows all the lcd bars activated. I'm guessing its a gear selector issue. I've disconnected the battery in the hope that it resets everything. Not connected it back yet - I heard that it needs leaving for a couple of hours for power to completely drain from ecu's etc.

Any ideas?
 
When you say the LCD shows all bars activated do you mean it is like a B with a cross thru it?
 
Salisburylander said:
When I turn the key, there is power to everything but it won't even turn over. It's an automatic and the gear indicator shows all the lcd bars activated. I'm guessing its a gear selector issue. I've disconnected the battery in the hope that it resets everything. Not connected it back yet - I heard that it needs leaving for a couple of hours for power to completely drain from ecu's etc.

Any ideas?
Click to expand...

Has your battery got full charge ?
 
Neilly

I'll have a look at the link and yes, it is a B with a cross through it.

Dippypud

The battery is down slightly. The car has been standing for nearly a month now but the battery has been on charge today.
 
Salisburylander said:
Forgot to mention there are 6 chimes too.
Click to expand...

3 is normal... for late 2's... earlies don't have any ...
have you tried it with your seat belt on ? Sounds random, but you may have turned on the seat belt warning and it'll confuse matters ...
 
Last edited:
You must log in or register to reply here.

Similar threads

T
Gear selector fault (automatic)
Replies
2
Views
417
Arctic2
Arctic2
A
L322 Key stuck in ignition won't turn off
Replies
6
Views
950
alexr3546
A
2
Gear selector stuck in neutral.
Replies
2
Views
2K
Firebobby1
Firebobby1
LR90210FR
Freelander 2 SD4 S 2012 | Automatic selector lever / gear selector lever is stuck
Replies
4
Views
2K
LR90210FR
LR90210FR
B
ZF 6HP26 inhibitor/gear position switch faults
Replies
1
Views
1K
Mark Piercy
Mark Piercy