C

ClassikFan

Active Member

• May 11, 2014

• #1

have had the seat folded up and now I have the base folded down but the seat back won't return to the vertical position. It goes up a few inches then there is a heavy clonk and it won't go any further.

 

meego

Well-Known Member

• May 11, 2014

• #2

www.discovery2.co.uk / Rear "Dickie" Seats - Stuck

Have a look at this.

 

C

ClassikFan

Active Member

• May 11, 2014

• #3

Should have said, mine is a 5 seater!

 

biggeeeee

Retired - Living the dream

• May 11, 2014

• #4

If its the back seat behind the front seats???
They dont usually return when the base isn't locked down properly.
Give the base a good thump down and it should lock

 

Vanmancan

Active Member

• May 11, 2014

• #5

^^^ agree , try the base again 1st

 

C

ClassikFan

Active Member

• May 11, 2014

• #6

I did check and drop the base a couple of times but still no go. Will have another try tomorrow.

 

jamesmartin

Well-Known Member

• May 11, 2014

• #7

ClassikFan said:

I did check and drop the base a couple of times but still no go. Will have another try tomorrow.

Click to expand...

push down on the base release lever once base is down

 

Orch

Active Member

• May 12, 2014

• #8

I find with mine I have to do base and back in one smooth motion, with a bit of speed and force and she goes up. It normally takes me 2 or 3 attempts each time. Which is annoying.

 

C

ClassikFan

Active Member

• May 13, 2014

• #9

Fixed it this evening.
Tried quick operation, slamming, oiling the catch and still not working!
Then I got hold of the strap that you pull to raise the base and pushed it in the opposite direction to the unlatching/raising action while the seat base was in the down position. This released the catch stopping the seat back going up. So, hey presto the solution. Push the strap in - job done!