The hazards on my 1980 series III don`t work, (they are the push/pull switch type with a 2 pin flasher unit in the auxillary switch panel) .Do these switches cause a lot of trouble? (Tried disconnecting the wires from the switch but then normal indicators stop working). As pre 85 Landys don`t have to have them, can I remove them, if so, anyone know how?
MoorlandBOB
Banned
remove em....
MoorlandBOB
Banned
maybee but more likely its wired direct at the plug,you may find some bullit connectors in there you can remove from the live feed tho.
blue beasty
Leaks an prone to bits dropping off
Tis mildly annoying not having them ever now and then so I've gotta twirly flashy amber jobby to dangle on the roofrack if I need to be stopped anywhere stupid
brian47
Well-Known Member
For some unknown reason other road users seem to take more notice of a "twirly flashy amber jobby" on the roof than they do the usual hazard flashers.
livers
Well-Known Member
Thing is they are only allowed when "recovering" or on certain other vehicles at specified times.
Not as Essex CC thought as a cover all on their bin lorries done well and truly for causing an obstruction down country lanes, Wasn't me honest
jamesmartin
Well-Known Member
often,try replacing switch
blue beasty
Leaks an prone to bits dropping off
Thing is they are only allowed when "recovering" or on certain other vehicles at specified times.
Not as Essex CC thought as a cover all on their bin lorries done well and truly for causing an obstruction down country lanes, Wasn't me honest
Only ever used it when recovering another vehicles and once chopping up a blurdy gert branch that had fallen across the road.....Other than that I try not to stop in stupid places
