discomark10
Well-Known Member
I just pushes the grit out to fast
gemsdad
NOT BOTHERED.
cobblers.just use a slower speed or just keep pushing the grinding paste back in using your finger.simples.like thor said,if a yank can do it???
by hand is better..
i assume youn lot do an oil test after??
and here Doc is why one ought to strip down engine while one has the chance and replace bearings etc..
number 2 main cap upper bearing..30yrs old..but i dont think gm installed them in two halves cut down the middle!
i assume youn lot do an oil test after??
and here Doc is why one ought to strip down engine while one has the chance and replace bearings etc..
number 2 main cap upper bearing..30yrs old..but i dont think gm installed them in two halves cut down the middle!
Last edited:
Dr_evil
Banned
This week the EWP arrives and a few other goodies. Ordered a new set of plugs for the beast, NGK BP4, oil and the engine mounts are being modified to fit as we made them a little too long for the chassis.
Gonna fit it with the bellhousing and possibly box attached to get an idea of what height to sit it at. But with the series suspension being raised a little I've got some leeway. Collecting some steel next week to do the box adaptors and mounts. Measure and mark out the bolt holes and central shaft hole in both then drill to the same size before welding in a piece of pipe to align them and act as an extra brace before welding the plate together with some 2x2 box laid in as a spacer
Gonna fit it with the bellhousing and possibly box attached to get an idea of what height to sit it at. But with the series suspension being raised a little I've got some leeway. Collecting some steel next week to do the box adaptors and mounts. Measure and mark out the bolt holes and central shaft hole in both then drill to the same size before welding in a piece of pipe to align them and act as an extra brace before welding the plate together with some 2x2 box laid in as a spacer
blue beasty
Leaks an prone to bits dropping off
Imperial and Merkin quarts are different
blue beasty
Leaks an prone to bits dropping off
5 US liquid quarts = 4.7l
Proper quarts is 5.8l
Proper quarts is 5.8l
Cheers blue
That does not include 1 qt for the filter
5qt is for oil panok..............
Dr_evil
Banned
I swear sometimes you just ask questions for the sake of it....Fett asked me that about 6 posts back
I swear sometimes you just ask questions for the sake of it....Fett asked me that about 6 posts back
not at all Doc. Don't be rude,
After asking
Wasn't into humorous reading yet this morning
