R

Radioactive Man

Active Member
There are loads of threads about the stuff in blue boxes!

I think I need a new vacuum pump for my 300tdi and don't want to waste cash I something that might not stop me when I need it.

I thought sometime ago that I read something that said a part number that ends in G is a genuine part.

Found some that are ERR3539 and some that are ERR3539G.

Is this true or did I dream it?

Cheers

Ian
 
Radioactive Man said:
There are loads of threads about the stuff in blue boxes!

I think I need a new vacuum pump for my 300tdi and don't want to waste cash I something that might not stop me when I need it.

I thought sometime ago that I read something that said a part number that ends in G is a genuine part.

Found some that are ERR3539 and some that are ERR3539G.

Is this true or did I dream it?

Cheers

Ian
Click to expand...

Tis true, ending with a 'G' means tis an OEM part, even in a blue box ... :cool:
 
Thanks. I would rather spend a little more on something that's not going to give me agro later on. Will get one that ends in G.

Ian.
 
A guy I know bought BPs G spec bushes and then compared them to the same part from LR main dealer, no comparison!!! LR bushes superior in every way!!!

But the "G" spec is better than the usual lotto type tat :rolleyes:
 
dieseldog69 said:
A guy I know bought BPs G spec bushes and then compared them to the same part from LR main dealer, no comparison!!! LR bushes superior in every way!!!

But the "G" spec is better than the usual lotto type tat :rolleyes:
Click to expand...

did he buy them direct from bp or through a retailer:rolleyes:
 
Optimus Prime said:
only you can make that judgement, perhaps you could ponder it when the brake pedal has gone rock solid because there is no vacuum assistance and you're trying to stop in a hurry...
Click to expand...

That's why I asked. Don't mind spending what is required. What I do care about is being able to stop and not using the car in front as some form of crumple zone...
 
I've just ordered a Bearmach one from LRS Offroad Shop |

Can't give you a price I'm afraid as he's a friend and so I get mates rates ;) He's always very very competitive though, so worth giving him a call for a price - he's usually at least a match for Paddocks and frequently cheaper.

NB The original one was made by WABCO. There are quite a few posts about brand new WABCO units failing quite quickly due to a defect, hence me buying a Bearmach one instead of OEM/Wabco.
 
can you buy repair kits for them vacume pumps (diaphragm etc)

I remember fitting one to my old pug 405
 
You must log in or register to reply here.

Similar threads

G
More 3 amigos
Replies
9
Views
486
guy2bro
G
D90 Td5
Aftermarket Hubs
Replies
3
Views
878
D90 Td5
D90 Td5
DefendingLancashire
Advice on decent flasher relay replacements? (1996 Defender 90)
Replies
0
Views
369
DefendingLancashire
DefendingLancashire
A
L322 L322 M62 Cabin heating issues
Replies
7
Views
1K
AndersForsberg
A
R
Ex military 90 soft top 1994 - 300TDi conversion
Replies
7
Views
742
ChristopherDailey
C