P

percypeanut

New Member
can any one please tell me how to put bullbars on my l reg disco as i have tryed but they seem to need a bracket or somthing please help many thanks
:(
 
They do, 2 infact, one on each of the chassis rails, you open up the chassis to bumper bolts at top and bottom, take the nuts off, slide the bracket over, bolt it back, then put the bull bar on the brackets.

If its a 300 series and its desinged for a 200 series, you need to remove the front number plate fairing, and screw the plate back on direct to the bumper, and trim some of the spoiler.

Some bull bars don't need a bracket (all in one) and some just go through the 300 series spoiler (200 series has slots already)

Any more questions?

See pic, we have one thats desinged for a 200tdi on our 300tdi so we know all this lol
 
ah yes, i missed that, no wonder she was laughing out loud, infact, i think i'll have a slight chuckle me sen

MUHAHAHAHA
 
al have to check on thickipedia but ah think de-singed mean you have taken the 8 track out
 
is it not when yer shave off yer eyebrows after yer burnt em with an over zealous lighter
 
as it a vehicle orientated site ah thought of the vehicular meaning of the afore mentioned term. maybe some else has anuffer meaning of it
 
You must log in or register to reply here.

Similar threads

T
Disco 2 Squeaky Clutch Pedal
Replies
3
Views
506
Tim C
T
R
Disco 2 Centre diff lock
Replies
9
Views
740
sierrafery
sierrafery
H
ABS compatabilty
Replies
3
Views
673
sierrafery
sierrafery
C
Help! D4 SDV6 clacking noise
2
Replies
33
Views
2K
kermit_rr
kermit_rr
R
Ac surround
Replies
1
Views
212
lynall
L