Hi all, can anyone tell me how are the wheel cylinders connected as the front on a dual lined series 3 with 2 wheel cylinders. The pipes come in to the middle of the cylinder from master and the a short pipe comes from the hole slightly from one side down to the bottom cylinder should it a) go to the central port or b) go to the one slightly to one side and. Then the bled in the centre or does it not matter?

Thanks for your help.

pipe into rear top cylinder then out through transfer pipe to front bottom bleed nipple in the other hole

Thanks for that. Looks like mine is piped the wrong way as the bleed is forward facing on the bottom front cylinders.