S Sid65 Member Feb 12, 2010 #1 Hi can anyone tell me the size of the brake pipes and fittings i will need to replace the one on my 1991 200tdi and how easy are they to replace
Hi can anyone tell me the size of the brake pipes and fittings i will need to replace the one on my 1991 200tdi and how easy are they to replace
fanatic RESPECT IS EARNED, BEATINGS ARE FREE ;-) Forum Sponsor Feb 12, 2010 #2 pure copper brake pipe and some motorfactors will make for you. Where are you
hughesy Well-Known Member Feb 12, 2010 #3 Pretty sure the copper pipes are 3/16 not sure about the fittings but I think they're 10mm. Get yourself a pipe flaring tool the pipes are a piece of **** to make. Also get yourself an eezi-bleed thingy it'll make the job a lot easier.
Pretty sure the copper pipes are 3/16 not sure about the fittings but I think they're 10mm. Get yourself a pipe flaring tool the pipes are a piece of **** to make. Also get yourself an eezi-bleed thingy it'll make the job a lot easier.
fanatic RESPECT IS EARNED, BEATINGS ARE FREE ;-) Forum Sponsor Feb 12, 2010 #4 copper nickel is ****-copper only
