jt_armstrong

Well-Known Member

• Apr 2, 2011

• #1

Hi Guys

I recently bought new rear discs for my Rangie as the old ones looked like surface of Steptoe's teeth. Went to fit them and the caliper housing is so badly corroded that only one of the silder pistons will move. The other is seized solid.

Is it OK to replace the housing but keep the old caliper? The caliper looks fine and moves freely.

Also I can't find any aftermarket units for sale anywhere. Rimmers sell a Land Rover unit for around 60 quid with exchange. Any one seen them anywhere else?

 

mgmayo

Active Member

• Apr 2, 2011

• #2

I did just what your proposing and it worked fine. Got it from lrdirect.com. You should also order the slider pins with it as old ones probably corroded.

 

jt_armstrong

Well-Known Member

• Apr 2, 2011

• #3

mgmayo said:

I did just what your proposing and it worked fine. Got it from lrdirect.com. You should also order the slider pins with it as old ones probably corroded.

Click to expand...

Thanks for that, i had assumed that the new one came with the slider pins so thatks for the heads up.

 

kooky_guy

Well-Known Member

• Apr 2, 2011

• #4

There are plenty on ebay too. I think most of the usual suppliers sell them.

I think it's more properly referred to as the Caliper mounting frame if that helps.

 

jt_armstrong

Well-Known Member

• Apr 2, 2011

• #5

kooky_guy said:

There are plenty on ebay too. I think most of the usual suppliers sell them.

I think it's more properly referred to as the Caliper mounting frame if that helps.

Click to expand...

Thanks Kooky, Rimmers gave me the correct part No (STC1907). I had picked the wrong name based on the online catalogue descriptions. They had none in stock but I see Island have them ready to ship.