Stevensharon
New Member
Hi all, any one changed the bonnet release cable on a freelander 1 2002?
Nodge68
Well-Known Member
Yes.
Stevensharon
New Member
Any tips or how to?
Nodge68
Well-Known Member
It's pretty easy.
Secure a length of strong twine (I'd used insulation tape) to the old cable, so that as the cable is pulled through, the twine follows the same route. Then secure the new cable to the twine using the same method, and draw the new cable back through.
It's not that difficult, but is easier if you have a helper.
Stevensharon
New Member
Thanks, thought it was pretty straight forward.It's pretty easy.
Secure a length of strong twine (I'd used insulation tape) to the old cable, so that as the cable is pulled through, the twine follows the same route. Then secure the new cable to the twine using the same method, and draw the new cable back through.
It's not that difficult, but is easier if you have a helper.
