G-man

G-man

BBQ king
been searching on paddocks etc and cant find the bulkhead fixing bolt anywhere ( the one that goes through the outrigger and the bulkhead)

anyone know the part number?
 
I just got an 8" M12 bolt for mine.
Well, strictly speaking, Pikey got it for me.
 
i like the use of both metric and imperial measurements there trew ;) 8" is approx 200mm int it?
 
near enough.

go into a builder's merchants and ask for 3.6m of 100mm x 50mm and yer'l get a blank look, but they understand 3.6m of 4 x 2!
 
i asked a steel merchant the other day for 5 foot of 3"x3" box with a min wall thickness of 3mm and got a blank look i had to convert the fooker into metric........

where do yer get bolts that long then mr hand?
 
G-man said:
i asked a steel merchant the other day for 5 foot of 3"x3" box with a min wall thickness of 3mm and got a blank look i had to convert the fooker into metric........

where do yer get bolts that long then mr hand?
Click to expand...

Well I got that one frum Wentners fasteners in Yeovil but am sure there's a fasteners place near you.
 
Paddock's part number is 336738 - look in series chassis parts. They're 90p each. Includes the nut.
 
You must log in or register to reply here.

Similar threads

S
heater control cabel routing
Replies
4
Views
577
codfather79
codfather79
Ninja Goat
Series 3 Dashboard Tape
Replies
4
Views
920
Kiwi Landie
Kiwi Landie
M
Part number dual brake system
Replies
2
Views
377
steve2286w
steve2286w
R
Chassis advice
Replies
5
Views
565
lynall
L
the_wolf
Bulkhead alignment issues.
Replies
17
Views
1K
meego
meego