thebiglad
Well-Known Member
O blumin hek,would i get away with welding a plate on to it? if not what else would i have to do?
I find it hard to believe that that's only just done that in the last few months since last mot, cause it's quite a big hole!!!!!
You need some rear body crossmember mounting brackets
from this place: MPS 4x4 Store Catalogue
Hope that helps
Dave
JAC
New Member
Good man, i'd just seen some o them on ebay, so will i still have to patch up the bodywork cause it's rusted through just above them aswel
CaptainChaos
New Member
OH DEAR
Doesn't look as bad as mine did yesterday before i refabricated a new rear panel myself
Looks like your gonna need to pick the body up a bit too as it looks to have sunk on it's haunches from the pics of the body mounts (mine had too)
The worrying thing on mine was that the bottom and top were shot to bits so might be worth checking under the plastic strip that goes between the bumper and door aperture as this seems to be a rust trap too
A good days work with a grinder, MIG and some steel will see things right though
Doesn't look as bad as mine did yesterday before i refabricated a new rear panel myself
Looks like your gonna need to pick the body up a bit too as it looks to have sunk on it's haunches from the pics of the body mounts (mine had too)
The worrying thing on mine was that the bottom and top were shot to bits so might be worth checking under the plastic strip that goes between the bumper and door aperture as this seems to be a rust trap too
A good days work with a grinder, MIG and some steel will see things right though
matt harvey
New Member
exactly the same as mine fella, goin in in next few days to get welded back up, also my door wont close as body has dropped, will look at them mounts, also under my door seal at the bottom has gone, joy oh joy, lannys whod have them, british leyland ****e lmao got to love them though
matt harvey
New Member
wish i hadnt looked at that catologue lol £152 worth of panels and brackets i need lol
Bloody hell - are their panels gold plated or summat.....
INNER WING REPAIR PANEL
Will fit Discovery upto 1998 with some modifications
Ref: LR320
MPS 4x4 Price: £ 79.95 inc VAT (EACH)
YRM Price £29.95
INNER WING REPAIR PANEL
Will fit Discovery upto 1998 with some modifications
Ref: LR320
MPS 4x4 Price: £ 79.95 inc VAT (EACH)
YRM Price £29.95
