tom1979

Well-Known Member

Full Member

• Oct 31, 2017

• #1

I’ve had a quick google and causes are mixed. My odemeter is blinking with no fault codes present. Could it just be a low battery or is it likely to be the mileage is incorrect or something else? Also if mileage is incorrect for some reason can it be “synced” using Lynx?
Cheers

 

neilly

Well-Known Member

• Oct 31, 2017

• #2

Sounds like mileage is incorrect. May just be because it was towed a short distance.

If you had a nancom you could read what the mileage is in the brain and see if it is different, you could also then turn the blinking off by disabling this in the system so it did not flash at you.

You could resync it, but only one way, if the mileage is lower on the dash and make it higher.

Cheers

 

tom1979

Well-Known Member

Full Member

• Oct 31, 2017

• #3

Hello again! Can this be done with Lynx? I don’t have a nanocom

 

neilly

Well-Known Member

• Oct 31, 2017

• #4

Hello AGAIN!!!!!!!!!!

NFI.......I do not have a lynx only a nanocom...LOL

Cheers

 

tom1979

Well-Known Member

Full Member

• Oct 31, 2017

• #5

Yeah it does seem that I may have invested in the wrong system years ago. Nanocoms seem to be able to do more