L

les rs

New Member

• Jan 27, 2008

• #1

I'm going to replace my clutch master cylinder so is there anything i should do or not do and what way do i go about bleeding the system

 

aussielander

New Member

• Jan 27, 2008

• #2

get RAVE cd or haynes manual

 

S

sparkyjohn5

New Member

• Jan 27, 2008

• #3

If it's a Freelander I Ithink they are all Sealed Units.

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Jan 27, 2008

• #4

and it needs to be changed as a complete system.

 

matts

New Member

• Jan 27, 2008

• #5

master slave cylinder are sealed and change as 1 unit, sealed so no bleeding needed, going to do mine tomorrow.....

 

L

les rs

New Member

• Jan 27, 2008

• #6

cheers for info. im going to order 1 tomorrow

 

P

Pepe

New Member

• Jan 28, 2008

• #7

matts said:

master slave cylinder are sealed and change as 1 unit, sealed so no bleeding needed, going to do mine tomorrow.....

Click to expand...

I changed mine, Its one whole lump not a bad job to change -- Beware!!! I laided on my back in the footwell to uncouple the master cylinder from the clutch pedal. This is the easy part, the horrible part is when the pedal shoots up and clouts you around the side of the head... The only bonus is you cant hear the wife nagging for a week