sarstad · Nov 4, 2010

it it posibel to put in the big BC in a range rover 2,5dse from 96

SpudH · Nov 4, 2010

Whats a big BC ????

sarstad · Nov 4, 2010

thows to nobs on the end of the indicator-arm

SpudH · Nov 4, 2010

You're going to have to be a little more descriptive.

I think you're talking about buttons on the end of the indicator stalk but I wasn't aware that there were different versions of these.
Any chance of a photo?

sarstad · Nov 4, 2010

i pick up the car next week then i take a pictur

sarstad · Nov 4, 2010

SpudH said:
You're going to have to be a little more descriptive.

I think you're talking about buttons on the end of the indicator stalk but I wasn't aware that there were different versions of these.
Any chance of a photo?

but you are right

sarstad · Nov 6, 2010

can i fit on with the to buttons on the end...

i think i is called info center

sarstad · Nov 7, 2010

SpudH · Nov 7, 2010

Its really strange that a DSE from 96 does not have those.

But to answer your question, if you have a high line BECM then I would say it would be real easy to fit them.
To find out if you have a high line BECM just take off the plastic surround to the fuse box cover under the seat and check if there is a big H on the label of the BECM

jwaldron · Nov 7, 2010

Could it be that the stalk itself currently in the car is in actual fact a replacement part and that someone has simply not fitted the correct one? If this is the case - the connections would all be in place to simply replace the item with a genuine or correct part...

sarstad · Nov 7, 2010

SpudH said:
Its really strange that a DSE from 96 does not have those.

But to answer your question, if you have a high line BECM then I would say it would be real easy to fit them.
To find out if you have a high line BECM just take off the plastic surround to the fuse box cover under the seat and check if there is a big H on the label of the BECM

der er ikke andet for at jeg må se om det er den BECM med H på.

hvad hvis det ik er??

rasheed · Nov 8, 2010

ever heard of google translate or babelfish?

sarstad · Nov 8, 2010

rasheed said:
ever heard of google translate or babelfish?

yes

must have been asleep when I wrote

there is nothing else that I may see whether it is the one with an H on..

what if it is not??
what if it is

sarstad · Jan 8, 2011

SpudH said:
Its really strange that a DSE from 96 does not have those.

But to answer your question, if you have a high line BECM then I would say it would be real easy to fit them.
To find out if you have a high line BECM just take off the plastic surround to the fuse box cover under the seat and check if there is a big H on the label of the BECM

i have the BECM with an big H on . so is it just a matter of changing the indicate arm ??

SpudH · Jan 8, 2011

Yeah, hopefully it should just work.

There is a setting in the BECM for whether or not a Trip computer is fitted but I've never seen a High line BECM without it so it should be ok.

sarstad · Jan 8, 2011

if not it is just to activate in the BECM ?

SpudH · Jan 8, 2011

Yeah, should be that simple. I would be very surprised if it didn't work as soon as you plugged it in and turn on the ignition

sarstad · Jan 8, 2011

SpudH said:
Yeah, should be that simple. I would be very surprised if it didn't work as soon as you plugged it in and turn on the ignition

i buy one at see what happens

sarstad

Active Member

SpudH

Well-Known Member

sarstad

Active Member

SpudH

Well-Known Member

sarstad

Active Member

sarstad

Active Member

sarstad

Active Member

Attachments

sarstad

Active Member

SpudH

Well-Known Member

jwaldron

New Member

sarstad

Active Member

rasheed

Well-Known Member

sarstad

Active Member

sarstad

Active Member

SpudH

Well-Known Member

sarstad

Active Member

SpudH

Well-Known Member

sarstad

Active Member

Similar threads