J

jonesbowie

New Member
Help Help Help.........this has got to be an obvious one but flat battery on 90 forces charge and therefore i have taken plate off but have I really got to take out the whole seat to get at it properly. I'm used to Series 1's so bit of a mystery to me, but need to use it!......Thanks:doh:
 
Only if someone has put different seats in...a 90 should have a lift out cushion, a sliding tray cover and thats it.
 
It's direct from Witham SV but must have carried someone who could request a bit motre comfort as they are moveable LR seats on runners and they tilt, so not the norm base and backs you would find........any ideas?
 
jonesbowie said:
It's direct from Witham SV but must have carried someone who could request a bit motre comfort as they are moveable LR seats on runners and they tilt, so not the norm base and backs you would find........any ideas?
Click to expand...


All 90/110 and defender seats are on runners.. Well all mine have been.. Try lifting the front of the seat base upwards and pull it towards you.
 
52848bae-dbc3-52b5.jpg


52848bae-dbe0-3f31.jpg


528488aa-dbf4-5ea7.jpg



Ta da. That's on my 1984;);)
 
Last edited:
Blimey...if all it takes to reach genius level is to pull firmly on a bit of foam filled plastic then no wonder the country is in a **** state.
 
You must log in or register to reply here.

Similar threads

B
Died on motorway and won't start
2
Replies
38
Views
2K
Stanleysteamer
Stanleysteamer
Montyjohn
P38A Battery - Bubbling and leaking
Replies
16
Views
1K
Springelec
S
W
Battery not Holding Charge Land Rover 90 1989
Replies
6
Views
771
Whiston90Gurt
W
L
Disco 4 (LR4) battery light on
Replies
9
Views
1K
Graculus
Graculus
J
Ex Mod Defender 1986 No History on ERM Search
Replies
5
Views
2K
yfo866
yfo866