As per title, one of mine is leaking. I know the part no, but price varies wildly.

For the HP pipe I need:

Genuine £80
Britpart OEM spec £20
Bearmach £10

The bearmach one seems to be to good to be true. But I could replace it every year for the price of a genuine one.

I have had britpart OEM spec ball joints and not been that impressed.

Anyone got any thoughts?

Ed

The fact that's it's britpart OEM really means nothing. It could be anyone OEM, in this case they are just a supplier.
Personally I'd go with the bearmach one, there's no reason that they should be expensive they are just a bit of tube with ends fitted on them.

Got the britpart OEM one in the end and I must say apart from the grime it was pretty much identical to the genuine one I took off. Went on fine, all the bends were correct and it bolted up no sweat.

I can get about 5 or 6 of these for the price of a genuine one so if it only lasts a few years it will still be worth it