Hi all, bit confused with my LPG kit on my V8.

I have a Bedini kit but did not get a manual and I am confused about the operation of the switch.

Can anyone tell me what happens when I put the switch on the various positions?

Hopefully you will see a photo below, but it is the first time I have posted one so here goes!:doh:


Bendini switch by daveherron7710, on Flickr

I do not know the specific kit you have, but it looks like every other LPG switch.

Do you have Carbs fitted? If so, I am pretty sure it will work in the standard way.

Position I (with the fuel pump picture) is petrol running to the Carbs.
Position O is no fuel running to the carbs
Position II is the LPG running to the carbs.

So, standard rules are, start on petrol (although you can start on LPG) wait unitl the engine gets warm, then go from I position to O position. When the petrol runs out of the carbs (and the engine is stalling) move across to II position and it will pick up on LPG.

Hope this helps.

Thanks for that

Just noticed my 200th Post. Happy Post Day to Me!!!!