mud muppet
New Member
does it give any more power and save any fuel?do some offroading so thinking wireing on a toggle switch.instead of thermostat type.
Indeed I do, does this make a difference? - Apparently it needs replacing so I don't mind spending a bit to Upgrade things, I prefer to upgrade than replace (if it needs doing).do you have aircon?
Ahh I see, tbh I don't use the air con if I can help it (I pop it on now and again to keep it running), but i only tend to use it if I'm standing still and it's roasting which isn't often that happens, but since it's on the vehicle and (touch wood) it still works, I'm going to leave it be.if you didnt have aircon - or was thinking of ditching it - yu could use the aircon fans. If yu want to keep them, then there is very little space left to fit another - but you could use them as cooling fans as well.
Umm.. the info in the link would suggest that the viscous fan is a better option, there is a lot of good info there, you learn something new every day! cheers.. I may just stay with the viscous setup.this is a fairly unbiased read and explains pretty well both http://www.google.co.uk/url?sa=t&rc...sg=AFQjCNEN_MoHb0JNxK1lncVSdMDrdJaISQ&cad=rja
this is a fairly unbiased read and explains pretty well both http://www.google.co.uk/url?sa=t&rc...sg=AFQjCNEN_MoHb0JNxK1lncVSdMDrdJaISQ&cad=rja
Umm.. the info in the link would suggest that the viscous fan is a better option, there is a lot of good info there, you learn something new every day! cheers.. I may just stay with the viscous setup.
how can you cool below thermostat opening temp ,thermostat only opens to allow coolant through rad when engine has reached operating temperature ,why would you want to cool below thermostat temp ,thermostat is there to ensure engine reaches operating temp as soon as possible ,your problem with your fan wasnt anything to do with thermostat but to higher temp setting on fan switchwell i read a couple of paras and gave up when i read that a big fan wont cool the engine below the termostat opening temp.... that is wrong.... i had a renault 19 diesel which we used to low a 4 berth caravan...temp would rise towards the red on long hills, . leccy fan on the rad only cuts in when the temp gauge hits the red... so fitted a switch to turn the fan on manually.... hitting some of them long hills on the a30 in devon with the gauge at approx half , turn the fan on at the start of the hill the gauge was well lower at the tops of the hills.... if hes made a basic mistake like that you cant trust anything else in the article.
as i understand the disco 1 aircon theres a thermo switch top front of the head that turns the aircon fans on when its too late... a switch accross that (so the two are in parallel) will turn the aircon fans into manually oporated cooling fans with the thermo switch as back up if you miss turning them on manually. you then can fit another switch in series ( cut any of the existing wires ) to turn the system off for wadind
tdis arent overcooled ,air speed is normally enough as with most vehicles ,50mph is a lot of air shifting through rad ,but you sit in traffic on a hot day and see if it is ,i thought quite balanced article,both leccy and viscous work ,viscous imo has less tendency to thermal shockI think yu missed the important bit............
" I get a lot of angry email from various automotive forums where this article is posted saying how wrong I am, yet every one of those people seem to miss the fact that this article is specific to the 2nd gen ('86-'92) RX-7. "
This article states quite clearly that different engines, different cooling parameters and different driving arenas will change the cooling requirements from a fan.
I think it is generally accepted knowledge that 200TDi's and to a lesser extent 300TDi's are overcooled and a fan is superfluous in most circumstances, therefore an electric fan will, when required, be more than adequate, because most of the time it will be off.