D90mitch
Well-Known Member
Right I am considering putting some non standard seats in the 90. These seats however do not have a removable base, so fitting an Anderson connector looks to be a good idea to more or less remove the need to get to the battery compartment. However the main problem is, which size should I get? Primarily the need for this is to of course provide access for jump leads (should I or someone else need it). Although, it would be nice to use it for other things like an inverter or tyre inflator for example:
1000W Car Battery Power Inverter Auto DC 12V To AC 220V Adapter Voltage Watt | eBay
is there a way I can have one connector for all three devices? The wires of course for the jump leads are very thick for the high amps but the ones for the tyre inflator much thinner. Please give me your suggestions. Thanks.
1000W Car Battery Power Inverter Auto DC 12V To AC 220V Adapter Voltage Watt | eBay
is there a way I can have one connector for all three devices? The wires of course for the jump leads are very thick for the high amps but the ones for the tyre inflator much thinner. Please give me your suggestions. Thanks.