T

tomcat59alan

Well-Known Member

• May 1, 2021

• #21

pete12345 said:

I will just have to try and find a wire I think because it worked before

Click to expand...

Yup,that ignition switch is still yours if you need it, did you check the wires and connector?

 

pete12345

Well-Known Member

• May 2, 2021

• #22

I’m going to try to do that today see I’ve I can find a extra wire or broken wire cheers Alan

 

kermit_rr

Very

Full Member

• May 2, 2021

• #23

At least you have an easy to fit anti theft device that nobody would ever find!!

 

pete12345

Well-Known Member

• May 2, 2021

• #24

True that I’ve stripped down the ignition no extra wires there I’ve anything one missing on a spade connector at the back of the ignition I’m trying to find a new connection block the black one that goes to the dashboard binical it’s starting now on and off but I know there’s still a loose or bad connection because the dashboard isn’t lighting up every time

 

pete12345

Well-Known Member

• May 3, 2021

• #25

Seems to be ok now all I did was remove fuse box again tested earth on the purple connector 2 white wires and the 2 that go from the becm tested the wires on the ignition all good and tried to clean the connector that goes to the binnacle the only concern now is the temp gauge isn’t going up as far as the old one so could be doggy wire there

 

Mark Piercy

Well fumbled member....

Full Member

• May 4, 2021

• #26

like this one?

 

Rubberknees

Well-Known Member

Full Member

• May 4, 2021

• #27

Mark Piercy said:

View attachment 237475 like this one?

Click to expand...

Woof Woof

 

pete12345

Well-Known Member

• May 4, 2021

• #28

That’s what the wiring looked like to me the untrained eye