P

petebowling

Member

• Aug 22, 2018

• #1

hi I've done some work on the rear suspension new dampers and toe link but now I have inactive air susp on the dash normally turning it full lock left to right it resets, but now it stays on no warning lights and the fuses are ok.
Has anyone any ideas what it could be or is there a trick to sort it out off the dash.
Petebowling

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Aug 22, 2018

• #2

It is in hard fault.....diagnostics only from here on.....

 

P

petebowling

Member

• Aug 22, 2018

• #3

petebowling said:

hi I've done some work on the rear suspension new dampers and toe link but now I have inactive air susp on the dash normally turning it full lock left to right it resets, but now it stays on no warning lights and the fuses are ok.
Has anyone any ideas what it could be or is there a trick to sort it out off the dash.
Petebowling

Click to expand...

K

 

P

petebowling

Member

• Aug 22, 2018

• #4

Thank you Saint v8
I suppose this means a major fault somewhere,I only changed the dampers and links .

 

K

kds

Well-Known Member

• Aug 22, 2018

• #5

The inner mount for the link bar is right near the height sensor, not caught that in any way have you ?

 

brianp38dse

Well-Known Member

• Aug 22, 2018

• #6

Did you let the hubs dangle with out the damper on as that can move the height sensors out of range and they don't like that.

 

P

petebowling

Member

• Aug 22, 2018

• #7

The hubs didn't hang but it is possible that I may have moved something within the sensor as you sai it's close to the bracket of the toe link,it was seines in.
I'll see when I get a diagnostics many thanks for everyone's help
Petebowling