hotsta1

New Member
Hi Peeps need some help and pointers. I recently changed the compressor on my 2002 td6. Had a hard fault as all the lights were off on the air suspension as I beleive this is due to me leaving the compressor disconnected. Anyway connected the new compressor took to my friends garage who has the snapon tool. He tried to lower the suspension which it did and now it will not raise at all! the back is sitting on the 22 rims!!!!:eek: He tried to clear faults but came up with code 116 Resevior pressure static when filling. My battery was weak so thought that might have something to do with it. But now I have charged it fully but its still not happening. I can hear the compressor but suspension not raising. Ps help.
 
Location would help, incase someone local who as the gear can hook it up and help the recalibration!
 
Right thanks guys for all the response so far. I went back to it today after work as this damn thing is bugging me. I looked at the compressor again. For some reason the air pipe in the compressor came loose??? Anyways put hat back in place and now the suspension has risen up. It looks like I'm on off road mode tho. Looks like those American monster truck! Still showing air suspension inactive!!!:violent::violent::violent::

NB I am based in Bow in London. 2 mins from the beloved Olympic village.
 
Right thanks guys for all the response so far. I went back to it today after work as this damn thing is bugging me. I looked at the compressor again. For some reason the air pipe in the compressor came loose??? Anyways put hat back in place and now the suspension has risen up. It looks like I'm on off road mode tho. Looks like those American monster truck! Still showing air suspension inactive!!!:violent::violent::violent::

NB I am based in Bow in London. 2 mins from the beloved Olympic village.
Check your measurements!!

36199d1349571747-eas-hieght-change-durations-l322_eas_heights_jpeg.jpg
 

Similar threads