T

tibbenham

New Member

• Jul 24, 2009

• #1

Hi. can anyone tell me how too calibrate the A.C.E. accelerometers on my 99v TD5.

i hope this will cure the A.C.E. warning light glowing orange.


:welcome2:

 

listerdiesel

Well-Known Member

Events Planner

• Jul 25, 2009

• #2

It's not a DIY job, and needs TestBook to calibrate the system.

Peter

 

T

tibbenham

New Member

• Jul 25, 2009

• #3

OK. I have booked it in to my local landrover dealer to go onto there computer.

 

T

tibbenham

New Member

• Jul 28, 2009

• #4

just an update-- discovery has been to landrover dealer today and thay say the car thinks the ace system has too much pressure when it has'nt so thay think the pressure sensor is faulty or the wire's going to it. so thay have ordered a new sensor to be fitted on friday.

i will let you know the outcome...

 

Urban Panzer

New Member

• Aug 1, 2009

• #5

The outcome will be that it will be fixed. The pressure transducer is about the only thing that fails (minus corroded pipes) on the ACE system. The ACE ECU does not store the fault if its not current, so if you want to replace it yourself now its been diagnosed, then once you change it (easy job) it will put the light out on its own once the new transducer is fitted.

 

T

tibbenham

New Member

• Aug 1, 2009

• #6

my discovery went into the land rover dealer today to have the ACE pressure switch fitted.
YES!! ACE is now working with no warning lights..

the cost was £185

 

Urban Panzer

New Member

• Aug 1, 2009

• #7

tibbenham said:

my discovery went into the land rover dealer today to have the ACE pressure switch fitted.
YES!! ACE is now working with no warning lights..

the cost was £185

Click to expand...