P

pauls440

New Member

• Aug 10, 2011

• #1

hi all i have just changed my rubber donut , but now the vibration is just as bad . should i take it back and turn the prop ??

 

defcrazy

Active Member

• Aug 10, 2011

• #2

you could have another problem ,a bad u joint ,bent prop shaft , worn bushes any of these things could have caused the rubber "dounut" to go bad in the first place

 

P

pauls440

New Member

• Aug 10, 2011

• #3

U joints all ok the old donut was crack

 

jamesmartin

Well-Known Member

• Aug 10, 2011

• #4

try it with it off in difflock then try the same with front if no better

 

P

pauls440

New Member

• Aug 10, 2011

• #5

ok will do but why would it get worse buy fitting a new one???

 

jamesmartin

Well-Known Member

• Aug 10, 2011

• #6

does diff flange have freeplay/endfloat ,have you bolted it in right,prop slide seized ,hand brake grabbing,front ? often worth trying with one prop off as it isolates the end to look at

 

P

pauls440

New Member

• Aug 10, 2011

• #7

ok will try tomorrow