Browny90

Active Member
Hi,

Looking for a 90 chassis.. dont really want to buy a new one as its only really a run about.

My chassis needs a rear cross member which i have, front sections and out riggers.. instead of patching that up, i would rather get a chassis in better condition and repair that if need be..

Ideally i would like a 2.5/ 200dti.. but i would consider any others and just move the engine mounts..

i would like one in fairly good condition.. not bothered about V5/ID's etc.. just a chassis..

Oh and a 90 seatbox if anyone has one laying around..

Thanks

browny
 
so no green lanes. Just pay and play sites, and you will trailer it every where you go. If rear cross is bad just plate and weld it. Doesn't need a mot what is the problem
 
i am far from cloaning.. it will initially be for off roading but may well q plate it and put it back on the road..
if people need proof, ill happily post pictures of the rebuild or people can come and watch if their that suspicious!!

I'm and Engineering contractor at Rolls-Royce in Derby and REME Army Reserves in Nottingham.. Hardly the type to cloan am i??

Its a 1986 with a disco 200 on a D plate.. so hardly worth cloaning really..

75SWB is also right if i was surely i would be after the ID..

Believe what you will, but if theres anyone out there that has a chassis please let me know..

Thanks
 
Heres a Pic my wife put on FB last night..
 

Attachments

  • Chassis Replacement Pics.jpeg
    Chassis Replacement Pics.jpeg
    205.3 KB · Views: 182
For all the effort and work of replacing the chassis. And the fact that if you replace it with a second hand one it will still be rotting away merrily inside.

I would suggest bite the bullet and buy a new Galv one.

It will only increase the value of the finished item and therefore is not wasting your money.


Tonks4x4 - The Land Rover Specialist
 

Similar threads