Litch

Well-Known Member
Hi folks, just popped across from the Defender section. ;)

I am about to fit an auto conversion to my 300TDi 90 using the Disco 4HP22 and was wondering if the Disco 1 Haynes Manual was a good source of information or whether it just contained a single line stating "the auto gearbox is out of scope for this manual so for all servicing & adjustments see your dealer"????

What I am looking for are general things such as fitting / removal of the autobox, adjustment of kickdown cable, torque figures for the flexplate & TC assembly, fluid capacity, servicing procedures etc etc. Is this sort of thing covered in the manual (in which case I will order one straight away) or is it a bit of a dead loss?
Personally I have always been a big fan of the Haynes but if it doesn't cover what I need then I won't bother.

Thanks. :D
 
Hi folks, just popped across from the Defender section. ;)

I am about to fit an auto conversion to my 300TDi 90 using the Disco 4HP22 and was wondering if the Disco 1 Haynes Manual was a good source of information or whether it just contained a single line stating "the auto gearbox is out of scope for this manual so for all servicing & adjustments see your dealer"????

What I am looking for are general things such as fitting / removal of the autobox, adjustment of kickdown cable, torque figures for the flexplate & TC assembly, fluid capacity, servicing procedures etc etc. Is this sort of thing covered in the manual (in which case I will order one straight away) or is it a bit of a dead loss?
Personally I have always been a big fan of the Haynes but if it doesn't cover what I need then I won't bother.

Thanks. :D

Get RAVE.
 
Haynes has the statement or similar u have quoted, although there's of four pages, two pages, on the box itself, plus two on selector, kick down cable, and switches.... removal, refitting or adjustment.
 
That sounds even better, thanks.

Not looking for great detail about rebuilding the box itself, just the general layout, adjustments, capacities & servicing.
 

Similar threads